Re: 1934 1103 ELECTRICAL PROBLEM

Posted by Terry Cantelo On 2012/1/1 7:15:54
Hi Tim,

I did as you suggested and then checked out the right hand headlamp and everthing was as you listed. However, on the left hand lamp when checking the three cables with a test lamp(Black natural ground, Brown power cable and green power cable.) I found the following in the three headlamp switch positions:- Position #1 Brown live, green dead, Position #2 Brown live, green dead, Position #3 Brown dead, green live.
With the switch in #1&2 position the green cable always shows it going to ground. This is the situation that's bugging me or is it correct by switching grounds to obtain the lamp operation.

Terry

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=92171