Re: converting from Houdaille to Delco shocks

Posted by FPTGearhead On 2012/1/5 13:34:37

Pat,

Thanks for the insight. This shock issue is going around and around. Yes I would like access to that data you suggested to check. I am assuming you are describing the valves that go inside the shock to adjust the way the shock works to suit the ride desired? As in the chart in the '38-'39 Shop Manual on page 79? Valid point. When I mentioned some of these variables to the shock rebuilders across the country they said that they would rebuilt them to a firm setting? So where does that fit in the scheme of this question? So I guess I am almost back to square one and contemplating to just get the original Houdes rebuilt from one of the reputable vendors and move on...

I recently found out that the Delcos sit real close to the combo fuel pump on the right side. The Houdes don't even come close to it. Max Merritt has a '38 Eight with Delcos and will rebuild and sell them to me. That is where I noticed the tight fit as per the photos he sent me.

Well does this issue of Delcos vs. Houdes also effect the rears?

Again thanks for the insight and can I get a look at that data you refer to?

David