Re: 37 120 grill louvers
Posted by Don 37 On 2012/2/2 21:27:56
Hello,
Below is a picture from my unrestored 1937 120CD Sport Coupes grille assembly.. It shows the linkage assy that attaches to the thermostat housing on the radiator. I also have a 1937 138CD Limo and it has is the same parts. I do have an extra linkage from a 37 Senior car but I can't remember if it is the same. It is with my Limo parts in Kansas and it is not readily available to check. It seems to be a simple shaft and pivot, and could easily be fabricated. If you need I could disassemble and sketch it where a handy person or a fab shop could duplicate. I belive the Jr and Sr can use the same thermostat, the JR one was rated at a lower temp than the SR, but each could use the other if need be.
Attach file:
(18.84 KB)
Below is a picture from my unrestored 1937 120CD Sport Coupes grille assembly.. It shows the linkage assy that attaches to the thermostat housing on the radiator. I also have a 1937 138CD Limo and it has is the same parts. I do have an extra linkage from a 37 Senior car but I can't remember if it is the same. It is with my Limo parts in Kansas and it is not readily available to check. It seems to be a simple shaft and pivot, and could easily be fabricated. If you need I could disassemble and sketch it where a handy person or a fab shop could duplicate. I belive the Jr and Sr can use the same thermostat, the JR one was rated at a lower temp than the SR, but each could use the other if need be.
Attach file:
(18.84 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=94104