Re: Radiator sylphon gasket material

Posted by tbirdman On 2012/3/11 21:31:36

I first tried the paper gasket on both sides and that didn't work. However I then use the black high temp sealant with the paper gasket. It appeared to work although I was surprise that the paper gaskets were damp.

I took it apart, because when I mounted it, I was one screw off. I was so busy worrying about getting the rtv all ove rthe place, I fail to notice I had mounted it wrong until after it had cured.

I'm just checking before I remount it again hopefully in the right position this time.