Re: Cleaning and replacing the oil pan gasket 356
Posted by 64avanti On 2014/3/21 22:18:23
Remove Pan
Clean pan
look for chunks. Bearing slivers are bad. Rod nuts worse.
Install pan.
A pan gasket will be less frustrating through a vender here than through NAPA.
Clean pan
look for chunks. Bearing slivers are bad. Rod nuts worse.
Install pan.
A pan gasket will be less frustrating through a vender here than through NAPA.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=141378