Re: 1941 180 no crank issue
Posted by garybryan On 2014/4/23 13:38:32
Thank you for your prompt reply.
I do in fact have a ground on one side of the button, but when I jump it to the other side (starter side) nothing happens. If I however supply a hot signal the starter turns, that has me a bit perplexed.
I will do some research as you have suggested. Any other ideas you may have?
I have included a picture of the starter, It has only one pig tail wire. If jumped with a hot signal the starter works, hence the reason I thought there may have been a relay in between the button and the solenoid.
Attach file:
(88.74 KB)
I do in fact have a ground on one side of the button, but when I jump it to the other side (starter side) nothing happens. If I however supply a hot signal the starter turns, that has me a bit perplexed.
I will do some research as you have suggested. Any other ideas you may have?
I have included a picture of the starter, It has only one pig tail wire. If jumped with a hot signal the starter works, hence the reason I thought there may have been a relay in between the button and the solenoid.
Attach file:
(88.74 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=143172