Re: trunk finishes for a 39 120 sedan
Posted by HH56 On 2014/5/12 21:19:23
Be interesting to see or hear about your results with the "mouse fur" on the complete trunk. Are you going to pick a standard color flock or do you have a decent enough bit of the original stuff left Flockit could make a custom blend close to the 39 color Packard called Brookwood Beige.
I applied nylon flock on the cardboard piece back of the seat. Didn't have anything decent of the original flock left on mine for a good color match other than it looked brownish so used a standard color. I used nylon because the fibers are slightly larger although still not as large or coarse as the original material.
Even though not originally flocked, the piece turned out looking pretty good and much better than the dull black replacement cardboard would have looked otherwise.
Wish I could offer info on your questions but prewars are a bit out of my field.
Attach file:
(37.99 KB)
I applied nylon flock on the cardboard piece back of the seat. Didn't have anything decent of the original flock left on mine for a good color match other than it looked brownish so used a standard color. I used nylon because the fibers are slightly larger although still not as large or coarse as the original material.
Even though not originally flocked, the piece turned out looking pretty good and much better than the dull black replacement cardboard would have looked otherwise.
Wish I could offer info on your questions but prewars are a bit out of my field.
Attach file:
(37.99 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=144055