Re: Removing 37 Packard 115 C Front Clip

Posted by Dave Munger On 2014/8/16 0:32:50

Corsa 7,
RE; front end wiring You should find 6 or so ( bullet type) connectors near the left front shock absorber, if it's wired as factory.

The front clip has 12 bolts running board & cowl to the fenders, 2 bolts ( in frame) for lower fender brace, 1 big nut, washer and rubber mounting pad at center of front crossmember, 2 brace rods at the radiator. The upper fender braces stay with clip, the lower do better being removed 4 small bolts at bottom edge of fender aft of tire.
Be careful of radiator core/fan clearance.

Get four people and remove.

Hope this helps I was working on a 1937 "120" , they should be very similar.

Both Ozstatman & Ken P are right IMO it's easier to pull the whole clip.
Packard 385