Re: Tropic Aire Heater
Posted by jfrom@kanter On 2014/10/29 11:23:59
Intact frames are impossible to find, old white metal cracks and disintegrates. the rh side is a duplicate of the intact lh side.
At the bottom on the lh side there is a small hole which is for an attaching rivet, was one on rh side also. They are for a photo-etched nameplate which was in one of several stylized Packard block letter or script. There may have been some other artwork in there but I do not recall.
You may want to try scanning and using a 3D printer to duplicate the other side if you plan on making molds for re-casting. Just an idea.
Thank
James
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=152167