Re: Wiring a 1932 901 4 door sedan

Posted by Marty or Marston On 2015/1/19 3:15:27

Dave,

I installed the harness for the steering column switch without any major problems without any hitches thanks to your photos. I also rebuilt the Fuse Block and replaced the nichrome wire and re-plated those parts that were zinc.

I have several questions that you might be able to help me with:

1. Do the wires that go from the harness to fuse block routed from the frame into the passenger compartment on the left side of the car in front of the vent upwards then across the firewall behind the left glove box
2. What size fuse goes in the holder
3. Based on the size of the holes on the wiring harnesses, it would appear that they connect where the arrows point in the last photo.

The reason I ask question #3 is I don't see how the connector makes good contact unless there is a bushing on the screw from the plastic mounting fixture that the fuse block is screwed to push it against the strap.

Any and all help would be appreciated.

Attach file:

---

  (119.40 KB)


  (135.74 KB)


  (162.07 KB)