Re: help with hood pad on my 33 1003, horn button removal

Posted by DavidM On 2015/1/5 4:44:12

Can't help with the hood pads but if the horn button set up is the same as a 1930 model then you need to remove the 2 bevel gear segments at the base of the steering column below the steering box and push the centre tubes towards the steering wheel then pull the "plastic" centre plate out enough to expose the underside of the plate That centre "plastic" plate is held in place from its underside by 4 screws. Removing the 4 screws will detach the centre plate and give access to the screw attaching the horn button. Hope that makes sense.