Re: help with hood pad on my 33 1003, horn button removal

Posted by Packardbarry On 2015/1/5 15:30:37

Not a TRICK just a lot of work.

Disconnect battery
Disconnect Horn Wire coming out of Light Switch. Orig there was an inline connector near Switch.
Remove Light Switch
Remove Hand Lever Gear mounted on Steering Box. Ur doing this just to get it away from the action so u dont break it.
Remove the Gear on the Colm Shaft.
Loosen the Clamp at the bottom of the Steering Box
Horn Button & Ring/light Switch Lever/Hand Throttle Lever should be pulled up and out. If inclosed car u can get just enough bow on the tubes to clear the headliner and get it fully out.
Horn Button & Ring r held onto the assy with 4 10-32 bolts. Remove the Hr Bt & Rg Assy from colm assy
HORN BUTTON is bolted to the outer ring via 3 8-32 screws

NOTHING TO IT !!!!!!!!