Re: Brake & Clutch Pedals and the Toe Board on a 1932
Posted by Marty or Marston On 2015/2/2 20:37:21
Tim, Dave (32model901) & DaveM I want to thank for your inputs. Neither pedal shows signs of being bent or alter.
The main portion of my brake pedal comes off of the hub at a 90 degree angle (see photo) with a slight jog at the top end. If I understand what Dave is saying, his car's brake pedal bends slightly to the right. I've made a sketch of what I think Dave mentioned.
This would meant that I should heat and bend my car's pedal to the right.
Attach file:
(80.59 KB)
(103.30 KB)
(60.16 KB)
The main portion of my brake pedal comes off of the hub at a 90 degree angle (see photo) with a slight jog at the top end. If I understand what Dave is saying, his car's brake pedal bends slightly to the right. I've made a sketch of what I think Dave mentioned.
This would meant that I should heat and bend my car's pedal to the right.
Attach file:
(80.59 KB)
(103.30 KB)
(60.16 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=156947