Re: Brake & Clutch Pedals and the Toe Board on a 1932

Posted by Marty or Marston On 2015/2/3 23:15:12

Mal & DavidM

Thanks for your inputs. What I think I'm going to do is get the body in a better position for the clutch to work while looking at the position of the steering column where it goes through the fire wall. At that point I should be able to make some measurements to see if it is possible to run down the correct pedal. The last resort would be to strip off the plating and either bend or cut out a section and weld in a jog that makes it work.