Re: Possible Ignition Problem
Posted by HH56 On 2015/4/2 15:17:57
Max and Kanter have the coils but they are quite expensive. I have a similar type with armored cable on my Clipper and didn't want to have to buy a $250 coil when Napa has universals for approx $25.
I wanted something to properly hold the armored cable rather than having to run a wire thru the firewall. To keep the original look -- more or less -- on mine, I made a holder to mimic the Clipper firewall mounted coil. Not sure how your coil mounts but believe it is on the engine. Depending on just how it mounts and which type armored cable it has, something similar should be possible.
Attach file:
(122.00 KB)
(61.25 KB)
I wanted something to properly hold the armored cable rather than having to run a wire thru the firewall. To keep the original look -- more or less -- on mine, I made a holder to mimic the Clipper firewall mounted coil. Not sure how your coil mounts but believe it is on the engine. Depending on just how it mounts and which type armored cable it has, something similar should be possible.
Attach file:
(122.00 KB)
(61.25 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=159857