Re: packing wheel bearing on a 33

Posted by Packardbarry On 2015/7/23 9:36:26

Ive looked at this Bearing Lub TOOL many times and thought about making one but in the end asked myself why. As said before best thing is to pull the bearings and clean or replace with new. Old grease can get as hard as the bearings and thus this Tool would not do u much good.

Agree with O-D that the bore matches the taper of the Axle and thus the threads give u a puller attachment. If u look at he poor photo u can c the female KEYWAY that matches the Axle KEY.

Wonder if the BEARINGBUDDY guy got his idea from this Lub. Tool. REMAKING THE WHEEL greaserhttp://www.bearingbuddy.com/how.html