Re: 1941 fender trims

Posted by Jerry On 2015/9/7 18:24:39

For what it is worth - I went out and measured my 42' 120

I also wonder if they were measured point to point or somewhere else!

Depending on how straight I held the ruler - the measurements were:

The rears measure 20 1/2" to 20 5/8"

I also have a bunch that are NOS that are marked with part number 366320 and they measure about 20 5/8" yet the parts book shows them being 19 7/8" and for the rear of both the 110 and 120 in 42'


The fronts measure 22 7/8" or 22 3/4"

I also have a bunch I took off 2 41' 110's that I parted out

The rears all measured in the 20 1/2" to 20 5/8"
while the fronts measured about 18 3/4" to 18 7/8"

The 42' parts book also list 3 different sizes for the convert with side mounts but no measurements are given - it says, 2 longs, 1 medium and 1 short and these part numbers are all different than the ones used on non side mount fenders

So from what the parts book says there were 5 different trim strips used on the front fenders