Re: Battery going dead

Posted by HH56 On 2008/11/2 11:12:07

As long as in off position, just leaving the key in iqnition should have no effect unless something really strange is going on with your switch. I think you are going to have to monitor with a low reading instrument and disconnect a bit at a time until drain stops and then see what in that circuit is amiss. Any hidden lights or signs of corrosion across two adjacent terminals on something? Another remote possibility would be the brake light switch. If the switch had an internal leak, it may still work but there would be a high resistance current drain through the fluid since the voltage is present on one terminal all the time.