Re: VACUME OPERATED CONVERTIBLE FOR A 1940 110

Posted by Dell On 2016/2/29 20:26:38

Vinnie; My leather seal were usable, I had new shafts machined and took the old seals and new shafts to motion industries- they just measured and supplied seals. I disassembled the vacuum switch and cleaned it and made sure to worked. It is just a sliding valve.
be very careful as it is made from pot metal. The switch body is also used on 40 Fords and some other makes. the mount is different on different years as I know the 40 and 42 are different.