Re: 1937 topshift transmission rebuild issues new guy
Posted by BDeB On 2016/6/30 12:58:26
Quote:
WillieIngerson wrote:
I sacrificed a box end wrench for that universal nut. I ground it down thinner to fit in there.
Willie
Tight clearance on the flange nut indicates a transmission from a 6 cylinder car which used a smaller u-joint than the 8 cylinder models.
Outside width of the flange is approximately 3-1/4" for the 6 and 3-3/4" for the 8.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=178453