Re: hot engine hard starting
Posted by fredkanter On 2016/7/12 12:14:54
Tom,
You are correct that it does no isolate a particular cylinder but just one cylinder is usually not the cause of hard hot starting.
My suggestion does isolate a single system, the accelerator pump circuit. There are many possible causes but only the accel pump circuit can be diagnosed without any tools or meters except possibly a screwdriver (or coin) to loosen the air cleaner.
I find it best to do the simplest analysis first if it is a likely cause. The second simplest would be to compare the cold and hot starting voltage at the starter to diagnose resistance and battery condition.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=178950