Re: 1941 Packard 110 - Water Pump Replacement

Posted by Ragtime Kid On 2016/7/17 14:53:08

Well, the removal of the pump was going well right until I got to the last bolt -- one of the two at the bottom -- and the head sheared right off. There is about 1/4" of the stud sticking out the front of the block but try as I might I can't get it to remove. I've used a propane torch to heat it and penetrating oil but the vise grips just chew up whats left of the end when I try to turn it.

What now?!