Re: Driver's door window removal

Posted by HH56 On 2017/3/11 0:26:09

To take the arm out of the slot in the bottom glass support there is usually a clip of some type at the end of the pin to keep it in the slot. Some models use a hairpin clip sliding in a groove on the pin and I have also seen a disc like item which has a sort of slot for the groove and a bent over spring like flap that fits over the end of the pin to retain the disc. Both are under some tension and may take a bit of help with a pair of channel locks to compress the regulator arm into the slot while you reach behind the glass and remove the clip. After the clip is removed, there is generally a steel washer next to the clip and two leather washers -- one leather on either side of the metal slot. Other regulators may have a cup shaped washer and spring assy on the arm side and leather on the back side next to the steel. Be sure to apply some white grease or a synthetic water resistant lube to the slot and leather or cup washer when you reinstall the glass.