Re: T/L Brake light switch

Posted by HH56 On 2017/3/19 23:06:18

Assuming it is for a 56 here is a a photo and bracket that would work for the switch Randy shows and probably the one mentioned by duane.g. I used a different switch but all have the same principle. The pedal arm depresses the switch plunger when brakes are relaxed. The bracket is simple to make and holds onto the column with a heat shrink covered hose clamp holding the two bent up tabs to the column.

The 1" dimension between column and switch hole may not work for a 55 because of the different pedal arrangement so that dimension would need to be verified on 55s

Attach file:

---

  (69.85 KB)