overdrive disassembly

Posted by Neil's1937 On 2017/4/29 13:06:04

I am disassembling the overdrive transmission from my 41 Super 8. I have removed the od housing with the tailshaft. I have removed the bolt and washer that holds the od gear cluster on the transmission output shaft.
My question concerns whether there is anything else to remove before the gear cluster can slide off the output shaft.
Looking at the cross section diagram in the 1935-41 Packard parts list, I think it should come off. Lightly prying gives no movement.

Anyone have any experience with this?

Thanks, Neil