Re: need info on how to remove front seat frame from 38 Packard 4 door club sedan

Posted by HH56 On 2017/5/24 21:06:35

You might poke your head under the car and look for threaded studs coming thru the floorboard. On every Packard I have worked on the front seat tracks are held by 4 nuts on each side. Most had studs coming thru with washers and nuts under the car but a few had actual bolts coming thru with the nuts below.

Not that familiar with prewars but the postwars had the frames bolted to the movable half of the track and the other half of the track bolted thru the floor.