Re: 1941 180 Clutch and Throwout Bearing Questions
Posted by hynesjm On 2017/6/23 1:27:28
Hey Guys, Quick update in case anyone else happens to find this thread in the future and faces a similar problem.
The throwout bearing from Kanter fit right on and was a super easy press on/press of swap.
Also, I ended up figuring out that you can't fight the clutch fork in once the clutch and pressure plate are installed. So I pulled those out, and took the advice posted on here about using some nuts to push the forks in. I am posting a picture here to help out those in the futre.
Attach file:
(766.95 KB)
The throwout bearing from Kanter fit right on and was a super easy press on/press of swap.
Also, I ended up figuring out that you can't fight the clutch fork in once the clutch and pressure plate are installed. So I pulled those out, and took the advice posted on here about using some nuts to push the forks in. I am posting a picture here to help out those in the futre.
Attach file:
(766.95 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=193291