Re: Need advice on Detroit Lubricator 51

Posted by 32model901 On 2017/8/30 6:42:18

I used short pieces of music wire.https://www.mcmaster.com/#music-wire/=195x9iu

Drill rod would also work.https://www.mcmaster.com/#drill-rods/=195xag7

Or the broken off ends of a size 50 drill would also do the job.https://www.mcmaster.com/#standard-drill-bits/=195xay7

Drill the depth at least 3X the pin projection, or about .300 deep. I press fit the pins in, if this is a problem drill the holes slightly larger and use thread locker, Loctite 261 or equivalent to hold them in.