Re: How do you flush Bijur lines?

Posted by Owen_Dyneto On 2018/1/10 20:47:53

My suggestion is that you start at the end (the drip plugs), one at a time remove them and clean the felt filters which may very well be restricted with dirt after all these years. Then use something like a Lincoln pressure hand oiler to force-feed the line. For any lines that fail to deliver oil to the drip plug, you'll now need to clean the hard line. Feeding fine wire back thru the line sections to clear them has worked well for me.

You may also have a intake filter at the pump reservoir which should be cleaned. And you may have to remove the shackle bolts to clear the oil passages in them.

PS - don't forget the throwout bearing.

Attach file:

---

  (54.75 KB)