Re: 1941 packard 180

Posted by maurice desrosiers On 2018/2/2 12:31:08

good day everybody i took off clip, cyl. head, and cut the ridge on cyl. no.1 took out the piston the top ring was broken i think it is original piston measures 3.497 piston walls ok no scratches cylinder no scratches clearance between piston and cyl. wall .010-.012. ring gap at 3 inches from top .035 i hope i can put pictures here and i will take out the other pistons Maurice

Attach file:

---

  (181.05 KB)