Mid-30's Transmission
Posted by Marty or Marston On 2018/8/15 19:36:53
I'm sorting through all the Packard Stuff that I got when I bought my '32 901. I'm trying to figure out what to save, or give away, or sell, or send to the metal bin.
I have a transmission and gears (Case P/N 216946) which I see goes in a 1100 to 1400 series model. Since it is all a part, I can't be sure if I have all the pieces to put it back together. I know that the bearings have seen their days and should all be replaced along with the seals.
The question I have, would it fit in my 901 if the 901's transmission experienced a catastrophic failure. Also, is there an exploded view of the transmission other than the one in the parts manual on page 174 (which I think may be for a different box).
Attach file:
(117.00 KB)
(131.18 KB)
(116.96 KB)
(167.69 KB)
(187.63 KB)
I have a transmission and gears (Case P/N 216946) which I see goes in a 1100 to 1400 series model. Since it is all a part, I can't be sure if I have all the pieces to put it back together. I know that the bearings have seen their days and should all be replaced along with the seals.
The question I have, would it fit in my 901 if the 901's transmission experienced a catastrophic failure. Also, is there an exploded view of the transmission other than the one in the parts manual on page 174 (which I think may be for a different box).
Attach file:
(117.00 KB)
(131.18 KB)
(116.96 KB)
(167.69 KB)
(187.63 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=205182