Temperature gauge line to head???
Posted by Packard Newbie On 2018/9/5 19:14:53
Hi All, in readying my engine for removal from my '39 Six, I obviously have to detach any and all things from it that are otherwise attached to the car so it CAN come out. One issue I am having is the fitting from the heat gauge supply line to the head. It does not look like it comes out easily. Is it pressed in there?? Threaded?? Can anybody help me with some removal advice???
Also, when unhooking the oil gauge line, is it necessary to maintain the oil in the line?? I presume some will drip out when I take it off. Would this screw up the gauge reading?? Or would the air just compress and 'delay' the eventual reading??
Attach file:
(167.25 KB)
Also, when unhooking the oil gauge line, is it necessary to maintain the oil in the line?? I presume some will drip out when I take it off. Would this screw up the gauge reading?? Or would the air just compress and 'delay' the eventual reading??
Attach file:
(167.25 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=205805