Re: Front Park Light Housing Parts Help

Posted by HH56 On 2018/11/4 14:59:46
Quote:
On another not I took the rear tailight bezels and the front park light housing in to be chromed and about shat myself on the money they to plate!!!!!!!


At least you are in Utah where I doubt the platers have all the regulations to contend with. There is probably still some competition for them which you can benefit from.

Between the Calif Air Resources Board which bans anything that stinks, the Calif version of EPA who goes after any kind of discharges that might remotely be considered hazardous waste and another Calif agency that seems to have their finger in lots of other places a substantial number of plating shops have decided the income does not pay for the hassle and have closed or moved.

The few that are still working and willing to take walk in customers with their assorted bits and pieces know they have a captive market and price accordingly. Your seven exclamation points on a Utah price would probably rate a dozen if you had them done here.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=207180