Re: Packing rear axle bearings on a 39

Posted by jwblazek On 2019/2/15 13:44:34
Thank you all for your valuable input.

This has been bugging me so was determined to find out where it went this AM. Interesting, parts are not identical left to right, and this appears to be a simple spacer / ledge for the top of the shoes to sit on over the eccentric. The left side (original & grimy) fits pretty snug on the eccentric and is comprise of two parts as you can see in the pic. The right side, cleaned parts, fit very lose on the eccentric and is comprised of the flat plate and the washer with a lip on the ID. Further, no clue as to why the right side has that small hole in the plate, but not going on the premise that this has been worked on and this was not an original part

Comments are welcome !

Attach file:



jpg  (48.88 KB)
111944_5c67086e81ff9.jpg 1008X490 px

jpg  (89.05 KB)
111944_5c6708854ea5d.jpg 1008X490 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=209360