Re: Bolt torque specification 1934 Super Eight
Posted by Tim Cole On 2019/7/14 7:25:44
You can reference ASTM tables for torque standards. They have lots of different types.
The table below is one example. I would use the grade 2 figure for paper gaskets and gradual hand tight for imitation cork gaskets.
If you wanted to be super scientific you would put a bore gauge into the cylinders to check for any distortion from uneven torque.
The system is not pressurized so lots of torque is not necessary.
Attach file:
(84.38 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=213327