Re: 1937 Six radiator fluid

Posted by Steve On 2019/10/30 10:46:14
Use a 50/50 mixture of coolant and water. If the car does not run it's going to be hard getting the solution into the engine and heater core (if it has a heater core). Take the thermostat outlet off remove thermostat and pour the coolant into the top of the block then replace everything, also now might be the time to change all the cooling hoses and the thermostat and gasket so you don't need to add more coolant if you need to change any of these items later. Hope this helps.....that's what this forum is all about. Welcome.
Your service and other factory literature are available here on this site. Look at the left margin and see all the offerings.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=216299