Re: 31 Stuck Engine

Posted by Greenfield On 2019/11/23 16:27:53

Thanks for the suggestion. I backed off the engine a quarter of a turn, then I filled the cylinders with a 50/50 mix of diesel and ATF. Then, I removed the carb and valve cover and endeavored to clean the valve area as best I could. I'm glad I did because I found a piece of wire from a wire wheel in there. I then soaked the where the valves pass up into the block and guides hoping I can get penetrant from underneath. While I had the access to the valves, I took note of which valves were open and closed and recorded it down. I let it go two weeks then report back.