Re: 1101 Brake assist issues

Posted by Owen_Dyneto On 2019/12/7 20:47:03

If the booster weren't working, you be close to using two feet and all you strength to stop the car. A quick and dirty test, with the engine running; have someone step on the brakes and hold them on. Go under the car and see if the cable from the booster to the linkage has gone from slack to taut. And while you're there, that cable passes thru a pulley that has a grease fitting that has probably been ignored for decades.

What two bolts were nearly falling out that you tightened and made the problem worse? Picture of them?