1924 Serie 1 Waterpump
Posted by Karl On 2019/12/11 13:36:35
Here the way I rebuild the Waterpump for my 1924 Sport Phaeton. Some nice guy glued all pieces with 2 compound glue tougether and fixed it with Silicon into the engine block.
For rebuild the shaft I used the repair kit from the Ford Model A. The shaft has exact the same diameter as the packard shaft and he is long enough to bring him on the right size. The impellerends are silver soldered to fill up the missing material. Missing parts for housing are reuild and weldet on place and cut out bei a mill.
Attach file:
(197.78 KB)
(207.15 KB)
(213.01 KB)
(190.89 KB)
For rebuild the shaft I used the repair kit from the Ford Model A. The shaft has exact the same diameter as the packard shaft and he is long enough to bring him on the right size. The impellerends are silver soldered to fill up the missing material. Missing parts for housing are reuild and weldet on place and cut out bei a mill.
Attach file:
(197.78 KB)
(207.15 KB)
(213.01 KB)
(190.89 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=217500