Re: Carter Carb fuel leak
Posted by jwblazek On 2020/3/9 18:13:24
Hey Owen
Have a question for you on this. From the photo, I am confused as to how the piston interacts with that linkage, unless it is installed improperly on this carb. I have the arm portion above the linkage as shown. It appears it has been bent in the past. If I place it under the linkage, like I think it should be, idles is far too high as the bend is prohibiting the return of the throttle to closed. Photo's on line aren't of much help
Attach file:
(236.26 KB)
Have a question for you on this. From the photo, I am confused as to how the piston interacts with that linkage, unless it is installed improperly on this carb. I have the arm portion above the linkage as shown. It appears it has been bent in the past. If I place it under the linkage, like I think it should be, idles is far too high as the bend is prohibiting the return of the throttle to closed. Photo's on line aren't of much help
Attach file:
(236.26 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=219784