Re: Need Cylinder Head, '34 8. What Yrs would be Interchangable ?

Posted by Tim Cole On 2020/5/13 7:26:15

Use a fill primer and block sanding. For the bolt areas place dummy bolts with washers on the contact areas to prevent tearing of the finish as evident on the water jacket.

As well, a light color primer will give a lighter tint to the green if that is preferred.

Finally, the water jacket bolts should be a heavy head which are hard to find but would make for a nice reproduction parts project. I would do it myself, but when work starts up again I will be buried in work.