Re: Marker lights/ Turn Signals
Posted by Packard Newbie On 2020/6/30 21:05:48
Hi Wjames,
I went through quite a bit of sourcing and qualifying with parking lights for my '39. The ones on your car look a lot like the 'correct' lights for my car, although that is not what I ended up buying due to the cost. I have attached a picture and you can compare it to what you have. If they look correct, I'd contact Max Merritt as that is where these came from. They may be able to sell you the gaskets or at least give you a pattern and you could cut your own out of some 1/16" thick neoprene. Hope this helps. Chris.
Attach file:
(290.79 KB)
I went through quite a bit of sourcing and qualifying with parking lights for my '39. The ones on your car look a lot like the 'correct' lights for my car, although that is not what I ended up buying due to the cost. I have attached a picture and you can compare it to what you have. If they look correct, I'd contact Max Merritt as that is where these came from. They may be able to sell you the gaskets or at least give you a pattern and you could cut your own out of some 1/16" thick neoprene. Hope this helps. Chris.
Attach file:
(290.79 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=224095