Re: Fuel sending unit test

Posted by Packard Newbie On 2020/11/19 16:06:37

Hi Howard,

That's a huge help. I will print the diagram and proceed carefully. I intend on using my spare gauge for the initial test and if need be, I can put a meter on the actual gauge and see where the hot negative goes. Once I get green-lighted with the bench test, I will just go ahead and install the sending unit. If the gauge doesn't work then, I know it's wiring or the dash gauge and I don't have to worry about the tank, as that is a bit of a bear to R&R. Thanks for the great info and quick response Howard. I'll report my findings. Chris