G’day
Hoping someone might be able to help, I have picked up the remains of a 1930 733 ( in pieces!,)
The crankcase number is *291898*
My current issue is the crankshaft that came with the it does not quite fit . Fits in all of main bearings, except #1 . The #1 bearing appears to be ~1/8” too wide ( at the timing gear end) vs the crankshaft journal. Even with the bearing shell out it will no go pass the crankcase web for bearing #1 (refer photo) .
My research of the parts manuals indicates the same crankshaft part # was used for 1930-1936 at least.
Any thoughts on what model the crankshaft is out of , any help would be much appreciated
Cheers Warwick
Attach file:
A2D4F179-FCFC-46BD-A191-590EFE5EC2B7.jpeg (302.55 KB) 0800FD86-0C57-47E6-A13B-FFF400DBAFF1.jpeg (302.55 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=229689