Re: Inner fender splash shields rubber replacement

Posted by Larry Reber On 2021/2/2 20:21:06
I had to cut the rivets cross wise to allow me to hand set them with a center punch and large drift punch, I do not have a press so this allowed me to get a good compression of the rivets.

Attach file:


jpg  20201214_182149.jpg (266.18 KB)
155070_6019fa82c1d33.jpg 1920X1080 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=230004