Re: 740 Trunnion spring Identification and installation

Posted by Peter Packard On 2021/4/3 2:32:39

Hello all, Thank you David M, I was hoping that one of the Sages on info,com would chime in on their experiences and recommendations with this.... Never Mind.... My "considered" opinion is that the condition of the roads and the availability of reasonably accurate wheel balancing has improved so much that the trunnion Block "anti shimmy device" is effectively rendered obsolete and that the device could be assembled in pretty well any order. I would assemble this trunnion with two short springs on the inner and two long springs on the outer. You are of course able to alter this at any time. Best Regards , Peter Toet.