Re: 356 cuin SWAP to 359 cuin
Posted by Scienceaddict On 2022/5/29 19:12:47
How do I tell the R9 from the R11?
Will the fact the 359 was set up for an automatic make much of a difference? It seems to have a full flywheel, albeit without a surface for the friction plate to ride on. Would that swap with the 282 flywheel, or did that change when they went to 288/327 etc.?
What about bellhousing pattern? The 359 has like an aluminum thing around the flywheel, 356 seems to have the bellhousing straight to the block.
Attach file:
Snapchat-1076748212.jpg (199.87 KB)
Will the fact the 359 was set up for an automatic make much of a difference? It seems to have a full flywheel, albeit without a surface for the friction plate to ride on. Would that swap with the 282 flywheel, or did that change when they went to 288/327 etc.?
What about bellhousing pattern? The 359 has like an aluminum thing around the flywheel, 356 seems to have the bellhousing straight to the block.
Attach file:
Snapchat-1076748212.jpg (199.87 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=244444