Re: 356 cuin SWAP to 359 cuin

Posted by Packard Don On 2022/5/29 21:02:41
Here is a pre-1951 R11 where the two pair of mounting holes are visible on the side which Howard described and it has the smaller pilot on the input shaft.

Attach file:


jpeg  E3204F80-D96E-4A50-9B7D-D40F54A2974B.jpeg (117.89 KB)
60923_629425c11f9a9.jpeg 1280X960 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=244456