Re: 1942 "160" turn signal & brake wiring problem??

Posted by auto.nut On 2021/6/6 11:52:15
Howard I really appreciate you trying to help me. I am completely lost right now and sure could use your help. Not only am I not getting full voltage to me turn signals, but I find out that I am not getting any voltage to my rear running or park lights. The front parking lights are working fine. On the diagram if I go to where the interconnections are just past the front fender under the car on the inside chassis rail, I am not getting any voltage there!!! I should be getting voltage on the first notch of the headlight switch. But if I look at the diagram wire 45D & 45C go to the front park lights. There are wires numbered 45B & 45C that I would think would be for the rear lights. But I do not get any voltage there at all. But what gets me about the diagram, is where are these wires connected to the Lighting Switch? They are not shown or they switch to different numbers which makes tracing impossible. Help!!

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=234129