Re: Flickering Fuel Gauge

Posted by HH56 on 2021/6/5 15:40:54
Gauge feed should be a wire coming straight from the ign switch so assuming it is tight and the ign switch is good then not much to go wrong. You are replacing the wire to the sender so that is good but diagrams show there is an inline connector. It is probably somewhere under the car or maybe in the trunk if the wires run overhead. Those inline connectors getting wet -- even in Packards day -- resulted in some oxidation and bad connection problems with intermittent issues.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=234101